Map your social network. More specifically…
- Step 1: Think of a specific objective you have at work or school that involves other people. Once you have thought of an objective, jot it down. You will refer to this objective throughout the analysis.
- Step 2: Use Figure 1 (below) to list five to fifteen people at your school or in your professional network with whom you have regular contact and who are relevant to the objective you identified.
- Step 3: Rate how tightly connected you are with the people in your network using the given scale (barely connected, loosely connected, somewhat connected, or tightly connected) on the left-hand side of their name.
- Step 4: Circle the name of anyone who has introduced you to four or more new people since you have known them.
- Step 5: In Figure Two (below), place a check mark in the intersecting box of people that know each other. For example, if person 1 knows person 2, put a check mark under the 2 at the top of the table. Continue to do this throughout the grid (grayed boxes should be left blank).
- Step 6: Analyze your network using the guidelines on the following calculations.
- Step 7: Consider ways to strengthen your network.
[Above] Figure 2
Next, see how your social network adds up:
Calculating Network Size
The number of people you listed as in your own network for this situation
N = ______
Calculating Network Density
It is important to understand what the maximum density of your network is. This refers to how dense it would be if everyone in your network knew each other.
(N * (N – 1)/2 = M) or ( __ * ( __ – 1)/2 = M)
M = ______
Total number of check marks in Figure Two, which represents number of relationships among people in your network.
C = ______
Density of your network (will range between 0 and 1)
C / M = D
D = ______
N = number of people in your network. The more people in your network, the greater the amount of information and possibly access to greater resources you have. We stopped at fifteen people but many individuals have more people in their network than fifteen.
The strength of your network is also important. You can talk about this in terms of percentages of your relationships. What percentage is very tightly connected? Close? Somewhat connected? Or barely connected?
- ___% Tightly Connected
- ___% Somewhat Connected
- ___% Loosely Connected
- ___% Barely Connected
For most people, it would be hard to manage a huge network where all the ties are very close, just by virtue of the amount of time and energy it takes to satisfy the conditions for closeness.
Identifying Central Connectors
Count how many names you circled in step 4. Each of these individuals plays a special role in your network as they are central connectors who serve to expand your network by introducing you to new people. If you are also a central connector, this can be a benefit to assessing information as long as you are able to keep the network from distracting you from your work.
Network density is important. When a persons network density is 1.0 that indicates that everyone in the network knows everyone else. Whether this is good or bad depends on a few things. For example, if everyone in your network has additional networks they belong to as well, you would be playing a central role in their networks and you would be a boundary spanner. But, if they also have high network density, the odds are that no new information is getting introduced into your group. You are basically a closed loop in which the same people interact with one another, and it is challenging to assess changes in the environment or to be innovative.
Social networks change over time depending on your tenure in an industry or company. The longer you have been in a given industry, the more likely it is that you will see your network size begin to shrink and become more dense.
Consider factors relating to power and influence and how you might go about strengthening and increasing the size of your network?
Is this the question you were looking for? Place your Order Here